White / Aqua Glow powder for all COE 1/4 oz

White / Aqua Glow for all COE 1/4 oz

This glow in the dark pigment works for all glass fusing projects.  Including glass bottle fusing, Bullseye glass fusing, Oceanside Glass fusing, Float Glass fusing, System 96 fusing, Wissmach 96 fusing and more.

• Keep in mind that a little bit used will give you quite a bit of action.  When I dust it I have my hands and small sifter about 8” above the area I desire to dust.  I do this with a large piece of paper under the art to catch any excess then put it back into the container.
• When dusting without a medium it must be fully encased inside of glass.  Cut your clear cap large enough to fully encapsulate all edges to trap the pigment inside.
• The White Glow and the Yellow Glow powder will show in your works.  So using it as a light color dusting should be accounted for.
• A medium that can be used is Non-Aerosol hairspray.  I mix some in a portion cup then apply it to my art using a spoon or coffee stirrer.
• Terrific to sprinkle onto the textured side of textured glass like chord or rough rolled then wipe the powder from the high areas to have it fall into the crevices of the texture.  Then cap as recommended.
• Glow powder can handle temperatures up to 1800 degrees F.
• Water is not to be used with glow even for cold working.  Water ruins the glow factor.
• Can be mixed with glass powder for casting.  Do not exceed 30% pigment to glass ratio.
• Can be mixed with any binder that does not contain water.  I like to use non-aerosol hair spray and paint it on,  (Do keep in mind that it does have a rough to the touch feel when applied in this manner.).
• Do not breathe the powder.  Do use a face mask and proper ventilation.
• Store in a cool dry place.

We ship to all USA addresses via USPS priority mail.  We can fit 40 items in this box and it is in with our PreCuts shipping group.

Thank you for viewing our fusible glass glow in the dark powder at Happy Glass Art Supply,

Irene - The happy glass art gal.